Easy to use, stand-alone and portable. With the Bump Test Station, functionality tests of gas detection and warning devices can be carried out easily and quickly.
• Easy to use
• Reliable results
• Automatic calibration
To test the device using a known gas concentration is the only way to guarantee a reliable, precise measurement and functionality against a gas hazard and to ensure correct warnings against them.
Dräger Bump Test Station X-am 1/2/5×00
1 without gas cylinder – 83 19 131
1 including test gas cylinder 58 l (gas and concentration are freely selectable) – 83 19 130
The Dräger Pac® 6000 disposable personal gas detector measures CO, H2S,
SO2 or O2 reliably and precisely, even in the toughest conditions. The robust
design, quick sensor response times, and a powerful battery ensure maximum
safety for up to two years with virtually no maintenance required.
• Strong performance for maximum safety
• Easy handling.
• Robust design – even for the toughest conditions
• User-friendly display with all important information
• 360° alarm with various functions
• Data logger and event logger for analyses and reports
• Economical operating costs
• Fast function test saves time and money
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector must be placed on the person so that the breathing zone is constantly monitored for safety.
Dimensions (W x H x D)
64 x 84 x 20 mm
Weight
Approx. 106 g (113 g with clip)
Device service life
2 years from first activation
Battery service life
2 years (O2 sensors min. 10 months)
Protection class
IP68
Air pressure
700 to 1,300 hPa
Air humidity
10 to 90% relative humidity, non-condensing
Temperature
-30 °C to +55 °C (briefly down to -40 °C for 1 hr, depending on sensor)
The Drager Pac 6500 is the personal single-gas detection device with unlimited life and measures CO, H2S, SO2 or O2 quickly and precisely. Quick sensor response times and a powerful battery also ensure safety.
• Strong performance for maximum safety.
• Unlimited life for instrument.
• 5 year warranty for H2S sensor.
• No shelf-life limitation.
• Robust design – even for the toughest conditions.
• User-friendly display with all important information.
• 360° alarm with various functions.
• Data logger and event logger for analyses and reports.
• Economical operating costs.
• Fast function test saves time and money.
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space, or where there is a potential for the presence of a dangerous gas or a lack of oxygen. The detector must be placed on the person so that the breathing zone is constantly monitored for safety.
Dimensions (W x H x D)
64 x 84 x 20 mm
Weight
Approx. 106 g (113 g with clip)
Battery service life
2 years (O2 sensors min. 10 months)
Protection class
IP68
Air pressure
700 to 1,300 hPa
Air humidity
10 to 90% relative humidity, non-condensing
Temperature
-30 °C to +55 °C (briefly down to -40 °C for 1 hr, depending on sensor)
With the robust Dräger Pac® 8000, you’ll be well equipped for tough conditions: this non-disposable, personal single-gas detection device is a reliable and precise instrument, which detects hazardous concentrations of 29 different gases, including special gases like NO2, O3 or COCl2.
• Unlimited operating time and there is no shelf-life limitation..
• Sensors for special gases NO,CO2,Cl2,HCN,NH3,PH3,OV,NO2,Phosgene.
• Robust design – even for the toughest conditions.
• Easy handling.
• User-friendly display with all important information.
• 360° alarm with various functions
• Data logger and event logger for analyses and reports
• Economical operational costs
• Fast function test saves time and money
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector must be placed on the person so that the breathing zone is constantly monitored for safety.
Dimensions (W x H x D)
64 x 84 x 20 mm
Weight
Approx. 106 g (113 g with clip)
Battery service life
2 years
Protection class
IP68
Air pressure
700 to 1,300 hPa
Air humidity
10 to 90% relative humidity, non-condensing
Temperature
-30 °C to +55 °C (briefly down to -40 °C for 1 hr, depending on sensor)
The Dräger Pac® 8500 single-gas detection device is a reliable and precise instrument even under the toughest of conditions. The detector can be equipped with a hydrogen-compensated CO sensor or Dräger dual sensor.The dual sensors provide the option of measuring two gases at once: either H2S with CO or O2 with CO.
• Unlimited operating time and there is no shelf-life limitation.
• Two gas detection in a single-gas device, either H2S with CO or O2 with CO. Or with a hydrogen-compensated CO sensor
• Measurement of carbon monoxide with significantly reduced cross sensitivity
• Robust design – even for the toughest conditions
• Easy handling.
• User-friendly display with all important information
• 360° alarm with various functions
• Economical operating costs
• Fast function test saves time and money
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector must be placed on the person so that the breathing zone is constantly monitored for safety.
Dimensions (W x H x D)
64 x 84 x 20 mm
Weight
Approx. 106 g (113 g with clip)
Battery service life
2 years (O2 and dual sensors min. 12 months))
Protection class
IP68
Air pressure
700 to 1,300 hPa
Air humidity
10 to 90% relative humidity, non-condensing
Temperature
-30 °C to +55 °C (briefly down to -40 °C for 1 hr, depending on sensor)
Dräger’s X-am® 2500 accurately detects O2, CO, NO2, SO2 and H2S and is the only 1-4 gas monitor you need in industrial, mining and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety.
• Matrix display
• High capacity battery
• X-dock compatibility
• Long-lasting, reliable sensor technology
• Zone 0 approved
• Diffusion or pump.
• Drager’s X-am 2500 is a robust, compact, reliable and easy-to-use multi-gas detector.
• Long-lasting, reliable sensor technology
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety.
Dimensions (W x H x D)
48 x 130 x 44 mm
Weight
Approx. 220-250 g
Operating times
> 12 h with alkaline and NiMH,
>13 h with NiMH HC, > 250 h w/o Ex sensor with alkaline
batteries
The Dräger X-am® 5000 belongs to a generation of gas detectors, developed especially for personal monitoring applications. This 1- to 5-gas detector reliably measures combustible gases and vapours as well as O2 and harmful concentrations of toxic gases, organic vapours, Odorant and Amine.
• Ergonomic mobile phone design
• Flexible sensor exchange
• Poison-resistant ex sensor
• Durable sensor technology
• Robust and watertight
• optional external pump
• Optimum solutions for function or bump tests and calibrations
• Flexible power supply
• Can be equipped with infrared sensor.
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety. And can be used to measure gases in absence of oxygen as well using Draeger infrared sensor.
Dimensions (W x H x D)
48 x 130 x 44 mm
Weight
Approx. 220-250 g
Operating times
> 12 hours with Alkaline and NiMH; > 13 hours with NiMH HC; without Ex Sensor typ. > 250 hours with Alkaline Battery; when using the Save Energy Mode > 40 hours
Datalogger
Retrievable using an infrared interface > 1000 h with 4 gases
at a recording interval of 1 value per minute
For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Dräger X-am 5100 portable single-gas detector ensures safe handling of HF, HCl, H2O2 or hydrazine – thanks to proven Dräger sensor technology and a device design which is perfectly customized to reactive gases.
• Ergonomic mobile phone design
• Flexible sensor exchange
• Poison-resistant ex sensor
• Durable sensor technology
• Robust and watertight
• Robust and watertight
• External pump
• Area monitoring
• Optimum solutions for function or bump tests and calibrations
• Flexible power supply
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety
Dimensions (W x H x D)
48 x 130 x 61 mm
Weight
220-250 g
Charging time
<4 hrs
Operating time
> 12 hours with Alkaline and NiMH; > 13 hours with NiMH HC; without Ex Sensor typ. > 250 hours
with Alkaline Battery; when using the Save Energy Mode > 40 hours
Protection class
IP54
Pump operation
Maximum hose length 30 m; 98 ft.
Data logger
> 12 hours with Alkaline and NiMH; > 13 hours with NiMH HC; without Ex Sensor typ. > 250 hours
with Alkaline Battery; when using the Save Energy Mode > 40 hours
Air pressure
700 to 1,300 hPa
Air humidity
10 to 90% relative humidity, non-condensing
Temperature
-20 °C to +50 °C
Approvals
ATEX
I M1 Ex ia I Ma, II 1G Ex ia IIC T3 Ga, I M2 Ex d ia I Mb, II 2G Ex d
ia IIC T4 / T3 Gb
Performance approval to:EN 50104 (2002) + A1 (2004) O2
EN 45544 CO & H2S
EN 60079-29-1:2007 Methane to nonane
EN 50271:2010 Software and documentation
Featuring an ergonomic design and innovative infrared sensor technology, the Dräger X-am® 5600 is one of the smallest gas detection instruments for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible, and toxic gases and vapors as well as oxygen.
• Small yet robust
• Durable infrared technology
• Single or dual sensor – accurate measurement results
• Also in combination with Hydrogen
• Various monitoring possibilities
• Flexible use
• Suitable for Ex-Zone 0
• Area monitoring
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety.
Dimensions (W x H x D)
48 x 130 x 44 mm
Weight
220 – 250 g
Ambient conditions
Temperature–20 to +50 °C (-40 to +50 °C for max. 15 minutes)
Pressure-700 to 1,300 mbar
Relative humidity-Ambient conditions Relative humidity 1
Protection class
IP67
Alarm
Visual-360°
Audible-Multi-tone > 90 dB at 30 cm
Operating times
~ 9 h or rather ~ 10.5 h
Charging time
< 4 h)
Datalogger
cCan be read out via Infrared > 1,000 hours with 6 gases and a recording interval of 1 value per minute
Pump operation
Maximum hose length 45 m; 148 ft.
Approvals
ATEX-I M1 Ex da ia I Ma II 1G Ex da ia IIC T4/T3 Ga
IECEx-IECExEx da ia I Ma
Ex da ia IIC T4/T3 Ga
CSA (Canada & USA)-Class I Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3 A
/Ex da ia IIC T4/T3 /Ga
Measurement performance certificate-EN 50104-O2,EN 45544-1, EN 45544-2-CO & H2S,EN 60079-29-1-Methane to nonane, H2
CE mark-Electromagnetic Compatibility (Directive 2014/30/EU)
MED-Marine Equipment Directive (Directive 2014/90/EU
EAC-PO Ex ia I Ma X
0Ex ia IIC T4/T3 Ga X
Clearance measurement was never this easy and convenient:
The 1 to 7 gas detector detects toxic and flammable gases as well as vapours and oxygen all at once – either in pump or diffusion mode. Innovative signalling design and handy assistant functions ensure complete safety throughout the process.
• Specially designed for use with a pump, optimised for clearance measurement
• Clearance measurement, release and documentation in no time
• Clear signalling design
• Economical Fleet Management
• Specialist for high and low hydrocarbon concentrations
• Inductive charging protects against wear and tear
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety. it can be used for area monitoring as well.
Dimensions (W x H x D)
179 x 77 x 42 mm
Weight
Approx. 495 g, depending on sensor configuration, without strap, without pump
Approx. 550 g, depending on sensor configuration, without strap, with pump
> With CatEx and 3 EC sensors Typically 24 hours
With IR and 3 EC sensors Typically 22 hours
With 3 EC sensors Typically 120 hours
With CatEx, PID and 3 EC sensors Typically 17 hours
With IR, PID and 3 EC sensors Typically 16 hours
With CatEx-, IR- and 3 EC sensors Typically 14 hours
PID only Typically 42 hours
Start up time
Typically <60 seconds for standard sensors
Data storage
12 MB, e.g. at 10 minutes per hour of gas exposure with measuring values changing by
the second on all 7 channels: approx. 210 hours
The Dräger X-dock® series provides you with full control of your portable Dräger gas detection instruments. Automatic bump tests and calibrations with reduced test gas consumption and short testing times save time and money. Comprehensive documentation and evaluations provide you with a clear overview.
• As versatile as your requirements
• Easier than ever before
• More safety thanks to complete documentation
• Automatically reduced costs
• Significant time savings
• Overview of results
• Touchscreen operation at the master station
• Up to three configurable test routines
• Automatic leak tests
• Automatic tests of alarm elements (acoustic, visual and vibration alarms)
• Optional charging function for X-am 1/2/5×00, 3500/8000
• Replaceable seal cartridge
• 12V operation (e.g., in vehicles) possible
• Can be subsequently expanded with up to 10 modules (X-dock 6300/6600)
• Evaluationof sensor response time
The Dräger X-dock® can provides you with full control of your compact Dräger gas detection instruments. Programmed bump tests and calibrations with decreased test gas consumption and short testing times save time and money. Comprehensive documentation and evaluations provide you with a clear overview.
Weight
Approx. 1,320 g
Dimensions
Approx. 122 x 145 x 250 mm
Protection Class
IP20
Power Supply
Via 24 V (8321849 & 8321850) power supply or car adapter
Approvals
CE marking
Ambient conditions
0 °C to 40 °C
Connections
Network Connection, USB 2.0
Gas Connections
6 test gas inlets for connecting 6 different test gases + one fresh air inlet + one waste gas outlet
State-of-the-art area monitoring – the Dräger X-zone® 5500 in combination with the Dräger X-am® 5000, 5100 or 5600 gas detection instruments can be used for the measurement of up to six gases and extends the portable gas detection technology to a comprehensive system with many applications.
• Innovative area monitoring
• Clear warning
• Wireless fence line
• Continuous operation for up to 120 hours
• 360°-gas entry
• inductive charging station: easy and convenient non-contact charging
• Data interface mod bus
• Secure area monitoring
The application fields of our mobile gas detection devices are diverse as your daily work, no matter in which industry. Use it for personal workplace monitoring, clearance measurement of confined spaces, leakage detection, area monitoring and much more.
Dimensions (W x H x D)
490 x 300 x 300 mm
Weight
10 kg (22 lbs.) (24 Ah battery)
Ambient conditions
Temperature max. +50 °C; max.
122 °F Pressure 700 to 1,300 hPa
Humidity 10 to 95 % r.h
Ingress Protection
IP67
Alarm
Visual 360° LED (illuminated ring)
Audible 360°; > 108 dB in a distance of 1 m (30 ft.), 120 dB in a distance of 30 cm (1 ft.)
Configurable alarm patterns, frequencies and volumes
Life signal
Green status display (360°),
illuminated ring (LED)
Operating time
Approx. 120 h (24 Ah battery)
Depending on sensor equipment / configuration of the life signal
Charging time
Approx. 14 h
Flexible power supply: External 100 – 240 V charger (worldwide) or inductive wireless charger
Pump operation
Maximum hose length: 45 m (150 ft.), 30 m (100 ft.) for zone 0
Alarm output
Potential-free alarm contact for intrinsically safe circuits (6-pole); < 20 V to 0.25 A (0.15 A constant current); Resisting load
Radio transmission
Worldwide license-free ISM frequencies
Digital radio, robust and interference-free transmission up to 100 m (656 ft.)
ATEX-I M1 Ex ia I Ma
II 1G Ex ia IIC T3 Ga
II 2G Ex ia d IIC T4 Gb
IECEX-Ex ia IIC T3 Ga
Ex ia d IIC T4 Gb
Ex ia I Ma
CSA/US-Class I, zone 0, A/Ex ia IIC T3 /Ga
Class I, zone 1, A/Ex ia d IIC T4 /Gb
Safety Security: For protecting the working workers of the Oil and gas sectors, this portable equipment offers the information on the safety issues due to detection of toxic gases nearby. It helps prevent the mishaps which could raise health issues also.
Portable: The tools are made to be able to operate at different workplaces; for instance, the pipelines in the oil field and the refineries as well as on the production of offshore production platform. They are very portable, easy and flexible and shift easily to other sites.
Advanced Technology: The wireless connectivity and high-quality sensors of modern portable gas detectors ensure a quick transfer of data to the central control room, as well as an instantaneous alarming of hazardous gas concentrations.
Regulatory Compliance: Companies can decrease the possibility of fines and increase their safety reputation by utilizing portable gas detection devices in adhering to the rules and requirements of industries for safety.
Easy to use Interface: All of the equipment can be operated even by non-technical staff members in case of a gas leak or any other emergency because most of them have user-friendly interfaces.
