Gas Detection Tubes

Showing all 9 results

East Wind Safety are the authorized dealer of Draeger Accuro Pump in UAE, Dubai and Abu Dhabi

Dräger Accuro Pump

Fast measurement with one hand: The Dräger-Tube pump accuro allows you to use the established Dräger-Tubes to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.

• Mobile spot measurement
• Functional bellows pump
• Sampling
• One-handed operation

Dräger-Tubes represent one of the classic forms of gas analysis. These versatile tubes make possible countless applications in industry, firefighting, disaster prevention, laboratory work, environmental protection and many other areas which require measurement results to be instantly available so that decisions can be made.

Dimensions (W x H x D)	170 x 45 x 85 mm
Stroke volume	100 ± 5 cm3
Weight	250 g
Air humidity	Relative humidity: 0 – 95% non-condensing
Temperature	-20 °C to +50 °C
Approvals	CE-certified (EN 0158) ATEX I M1 II 1GD IIB 85°C T6 II 2G IIC T6 -20 °C ≤ Ta ≤ +50 °C DIN EN ISO 17621

Download Brouchure Video

Dräger Aerotest Simultan HP

Dräger Aerotest Simultan HP is used to determine the quality of respiratory air in high-pressure applications. In combination with the new Dräger Oil Impactor the system offers a unique quality level for the monitoring of compressed air.

• Monitored breathing air
• Fast and simple application
• The Dräger Oil Impactor
• Always ready for use

By using the Dräger Aero test Simulant HP, the quality of the breathing air from a compressor or a compressed air cylinder can be tested. The application of the test system ensures the reliable testing in accordance with the purification standard EN 12 021. The Aerotest product family is based on the well known Dräger-Tubes® – a reliable and quick test method to detect and measure possible toxic gases. The Dräger Aerotest Simultan HP enables the quantitative detection of various potentially harmful substances, e.g. carbon monoxide,
carbon dioxide, water vapor and oil in dispersing compressed air. The values
can either be determined individually or simultaneously.

Dimensions [L x W x H, mm] 350 x 300 x 85

Weight [kg] Approx. 3.0

Supply Pressure [bar] 200 / 300

Connection G 5/8

Flow [L/min] 0.2 and 4.0

Download Brouchure Video

East Wind Safety - Draeger Air Quality Test Tubes in UAE, dubai and abu dhabi

Dräger Air Quality Test Tubes

By using the Dräger Aerotest Simultan HP, the quality of the breathing air from a compressor or a compressed air cylinder can be tested. The application of the test system ensures the reliable testing in accordance with the purification standard EN 12 021.
The Dräger Aerotest Simultan HP enables the quantitative detection of various potentially harmful substances, e.g. carbon monoxide, carbon dioxide, water vapor and oil in dispersing compressed air. The values can either be determined individually or simultaneously.

• Results are directly shown at the end of the measurement process
• Short measurement time: between 5 seconds to 15 minutes
• Quick and targeted measurements
• Easy handling
• Flexible use

• Measurements of compressed air / compressed gases
• The measuring instrument can be connected to the high-pressure air network. It takes five minutes until the Aerotest displays an indication about the degree of contamination of the filled breathing air.

Carbon dioxide 100/a-P	Range – 100 to 3000 ppm Part Number – 67 28 521
Carbon monoxide 5/a-p	Range – 5 to 150 ppm Part Number – 67 28 511
Water Vapour 20/a-P	Range – 20 – 100 mg/m3 Part Number – 8103061
Oil-Impactor	Part Number – 8103560

Download Brouchure Video</a

East Wind Safety - Draeger Benzene Gas Detection Tubes in UAE, Dubai and Abu Dhabi

Dräger Benzene Gas Detection Tubes

Gas detector tubes are one of the classic measurement methods used for gas analysis today. This versatile system can be used in numerous applications in industry, firefighting and disaster management, in the laboratory, marine, for environmental protection and in many other areas.
Using Drager benzene gas detection tubes you can measure rom 0.5 to 420 ppm.Dräger sampling tubes and systems measuring complex compounds and mixtures of substances, to manual and automatic tube pumps.

• Results are directly shown at the end of the measurement process
• Short measurement time: between 5 seconds to 15 minutes
• Quick and targeted measurements
• Easy handling
• Flexible use

• Air examinations at the workplace in the range of legal limit values
• Technical gas analysis in the areas of emission concentrations
• Measurements of compressed air / compressed gases

Benzene 0.5/a	Range – 0.5 to 10 ppm Number of Strokes – 15 Part Number – 67 28 561
Benzene 0.5/c (5)	Range – 0.5 to 10 ppm Number of Strokes – 20 Part Number – 81 01 841
Benzene 2/a (5)	Range – 2 to 60 ppm Number of Strokes – 8 Part Number – 81 01 231
Benzene 5/a	Range – 5 to 40 ppm Number of Strokes – 3 Part Number – 67 18 801
Benzene 5/b	Range – 5 to 50 ppm Number of Strokes – 8 Part Number – 67 28 071
Benzene 15/a	Range – 15 to 420 ppm Number of Strokes – 4 Part Number – 81 01 741

Download Brouchure Video

East Wind Safety - Draeger Carbon Dioxide (CO2) Gas Detector Tubes in UAE, Dubai and Abu Dhabi

Dräger Carbon Dioxide Gas Detection Tubes

Gas detector tubes are one of the classic measurement methods used for gas analysis today. This versatile system can be used in numerous applications in industry, firefighting and disaster management, in the laboratory, marine, for environmental protection and in many other areas. Using Drager CO2 gas detection tubes you can measure 100-3000 ppm or 0.5 – 60% volume.

• Results are directly shown at the end of the measurement process
• Short measurement time: between 5 seconds to 15 minutes
• Quick and targeted measurements
• Easy handling
• Flexible use

• Air examinations at the workplace in the range of legal limit values
• Technical gas analysis in the areas of emission concentrations
• Measurements of compressed air / compressed gases

Carbon Dioxide 100/a	Range – 100 to 3000 ppm Number of Strokes – 4 Part Number – 81 01 811
Carbon Dioxide 0.1%/a	Range – 0.5 to 6 Vol% – 0.1 to 1.2 Vol% Number of Strokes – 30 – 2 Part Number – CH23 501
Carbon Dioxide 0.5%/a	Range – 0.5 to 10 Vol% Number of Strokes – 30 Part Number – CH31 401
Carbon Dioxide 1%/a	Range – 1 to 20 Vol% Number of Strokes – 30 Part Number – CH25 101
Carbon Dioxide 5%/A	Range – 5 to 60 Vol% Number of Strokes – 2 Part Number – CH20 301

Download Brouchure Video

East Wind Safety - Draeger Carbon Monoxide (CO) Gas Detection Tubes in Oman, Muscat

Dräger Carbon Monoxide Gas Detection Tubes

Gas detector tubes are one of the classic measurement methods used for gas analysis today. This versatile system can be used in numerous applications in industry, firefighting and disaster management, in the laboratory, marine, for environmental protection and in many other areas. Using CO gas detection tube you can measure from 2- 3000 ppm or
0.3 -7 % volume

• Results are directly shown at the end of the measurement process
• Short measurement time: between 5 seconds to 15 minutes
• Quick and targeted measurements
• Easy handling
• Flexible use

• Air examinations at the workplace in the range of legal limit values
• Technical gas analysis in the areas of emission concentrations
• Measurements of compressed air / compressed gases

Carbon Monoxide 2/a	Range – 2 to 60 ppm Number of Strokes – 4 Part Number – 67 33 051
Carbon Monoxide 5/c	Range – 100 to 700 ppm – 5 to 150 ppm Number of Strokes – 50s – 4 Part Number – CH25 601
Carbon Monoxide 8/a	Range – 8 to 150 ppm Number of Strokes – 2 Part Number – CH19 701
Carbon Monoxide 10/d	Range – 100 to 3000 ppm – 10 to 300 ppm Number of Strokes – 40s – 6 Part Number – 81 03 321
Carbon Monoxide 10/b	Range – 100 to 3000 ppm – 10 to 300 ppm Number of Strokes – 20s – 3 Part Number – CH20 601
Carbon Monoxide 10/c	Range – 10 to 250 ppm Number of Strokes – 1 Part Number – 81 01 951
Carbon Monoxide 0.3%/b	Range – 0.3 to 7 Vol% Number of Strokes – 30 Part Number – CH29 901

Download Brouchure Video

East Wind Safety - Draeger H2S Gas Detection Tubes in Oman, Muscat

Dräger H2S Gas Detection Tubes

Gas detector tubes are one of the classic measurement methods used for gas analysis today. This versatile system can be used in numerous applications in industry, firefighting and disaster management, in the laboratory, marine, for environmental protection and in many other areas. Using Drager H2S gas detection tubes you can measure 0.2 – 2000 ppm or 0.2 to 40% volume.

• Results are directly shown at the end of the measurement process
• Short measurement time: between 5 seconds to 15 minutes
• Quick and targeted measurements
• Easy handling
• Flexible use

• Air examinations at the workplace in the range of legal limit values
• Technical gas analysis in the areas of emission concentrations
• Measurements of compressed air / compressed gases

Hydrogen Sulphide 0.2/a	Range – 0.2 to 5 ppm Number of Strokes – 5 Part Number – 81 01 461
Hydrogen Sulphide 0.2/b	Range – 0.2 to 6 ppm Number of Strokes – 55s Part Number – 81 01 991
Hydrogen Sulphide 0.5/a	Range – 0.5 to 15 ppm Number of Strokes – 6 Part Number – 67 28 041
Hydrogen Sulphide 1/c	Range – 10 to 200 ppm – 1 to 20 ppm Number of Strokes – 20s – 3 Part Number – 67 19 001
Hydrogen Sulphide 1/d	Range – 10 to 200 ppm – 1 to 20 ppm Number of Strokes – 1 – 10 Part Number – 81 01 831
Hydrogen Sulphide 2/a	Range – 20 to 200 ppm – 2 to 20 ppm Number of Strokes – 20s – 3 Part Number – 67 28 821
Hydrogen Sulphide 2/b	Range – 2 to 60 ppm Number of Strokes – 30s Part Number – 81 01 961
Hydrogen Sulphide 5/b	Range – 5 to 60 ppm Number of Strokes – 4 Part Number – CH29 801
Hydrogen Sulphide 100/a	Range – 100 to 2000 ppm Number of Strokes – 30s Part Number – CH29 101
Hydrogen Sulphide 0.2%/A	Range – 0.2 to 7 Vol% Number of Strokes – 2 Part Number – CH28 101
Hydrogen Sulphide 2%/a	Range – 2 to 40 Vol% Number of Strokes – 1 Part Number – 81 01 211

Download Brouchure Video

East Wind Safety - Draeger Mercaptan Gas Detection Tubes in UAE, Dubai andAbu Dhabi

Dräger Mercaptan Gas Detection Tubes

Gas detector tubes are one of the classic measurement methods used for gas analysis today. This versatile system can be used in numerous applications in industry, firefighting and disaster management, in the laboratory, marine, for environmental protection and in many other areas.Using Drager mercaptan gas detection tube you can measure
0.1 to 100 ppm.

• Results are directly shown at the end of the measurement process
• Short measurement time: between 5 seconds to 15 minutes
• Quick and targeted measurements
• Easy handling
• Flexible use

• Air examinations at the workplace in the range of legal limit values
• Technical gas analysis in the areas of emission concentrations
• Measurements of compressed air / compressed gases

Mercaptan 0.1a	Range – 0.1 to 2.5 ppm Number of Strokes – 10 Part Number – 81 03 281
Mercaptan 0.5/a	Range – 0.5 to 5 ppm Number of Strokes – 5 Part Number – 67 28 981
Mercaptan 20/a	Range – 20 to 100 ppm Number of Strokes – 2s Part Number – 81 01 871

Download Brouchure Video

East Wind Safety - Draeger 5000 Automatic Tube Pump in UAE, Dubai and Abu Dhabi

Dräger X-act 5000 Tube Pump

The automatic tube pump Dräger X-act® 5000 is the first all-in-one solution designed for measurements with Dräger short-term tubes and for sampling tubes and systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols.

• Versatile and robust
• New pump concept
• Simplicity of operation
• Automatic transfer of measurement parameters
• Measurement in technical gases
• Direct settings for sampling

Flow Rate Range	0.1 to 2.0 L/min Resolution 0.1 to 1.0 L/min: 0.1 L/min ± 10 % Resolution 1.0 to 2.0 L/min: 0.2 L/min ± 10 %
Sampling Time	adjustable, up to 12 hours, depending on flow rate Resolution in steps of 15 minutes (default) or 1 minute
Display	Two parts: Segment and matrix
Menu languages	Danish, Dutch, English, Finnish, French, German, Italian, Norwegian, Polish, Spanish, Swedish
Use of extension hose	Up to 30 meter (98 ft.)
Dimensions (H x W x D)	Approx. 175 x 230 x 108 mm (7“ x 9“ x 4.25“)
Weight (without battery pack)	Approx. 1.6 kg (3.5 lbs)
Temperature during storage	– 20 to 55 °C (- 4 to 131 °F)
Temperature during operation	5 to 40 °C (41 to 104 °F)
Humidity	0 to 95 % r. h., non-condensing
Pressure	700 to 1,300 hPa (10.2 to 18.9 psi)
Rechargeable Battery NiMH, T4	7.2 V, 1,500 mAh (charging time < 4 hours)
Battery capacity at 25 °C (77 °F)	Dräger short-term tubes: >1,000 strokes Sample taking: up to 12 hours, depending on adjusted flow rate
Approvals	ATEX, MED, cUL, IECEx, CE-mark

Download Brouchure Video

Dimensions [L x W x H, mm]	350 x 300 x 85
Weight [kg]	Approx. 3.0
Supply Pressure [bar]	200 / 300
Connection	G 5/8
Flow [L/min]	0.2 and 4.0