Multi Gas Detector

Showing all 6 results

Dräger X-am 5000 Multi Gas Detector

The Dräger X-am® 5000 belongs to a generation of gas detectors, developed especially for personal monitoring applications. This 1- to 5-gas detector reliably measures combustible gases and vapours as well as O2 and harmful concentrations of toxic gases, organic vapours, Odorant and Amine.

• Ergonomic mobile phone design
• Flexible sensor exchange
• Poison-resistant ex sensor
• Durable sensor technology
• Robust and watertight
• optional external pump
• Optimum solutions for function or bump tests and calibrations
• Flexible power supply
• Can be equipped with infrared sensor.

Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety. And can be used to measure gases in absence of oxygen as well using Draeger infrared sensor.

Dimensions (W x H x D)	48 x 130 x 44 mm
Weight	Approx. 220-250 g
Operating times	> 12 hours with Alkaline and NiMH; > 13 hours with NiMH HC; without Ex Sensor typ. > 250 hours with Alkaline Battery; when using the Save Energy Mode > 40 hours
Datalogger	Retrievable using an infrared interface > 1000 h with 4 gases at a recording interval of 1 value per minute
Protection class	IP67
Air pressure	700 to 1,300 mbar
Air humidity	10 to 95% relative humidity, non-condensing
Temperature	-20 °C to +50 °C
Charging time	<4 hrs
Approvals	cCSAus, IECEx, ATEX, CE, MED

Download Brouchure Video

East Wind Safety - Draeger X-am 5600 Multi Gas Monitor Device in UAE, Dubai and Abu Dhabi

Dräger X-am 5600 Multi Gas Detector

Featuring an ergonomic design and innovative infrared sensor technology, the Dräger X-am® 5600 is one of the smallest gas detection instruments for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible, and toxic gases and vapors as well as oxygen.

• Small yet robust
• Durable infrared technology
• Single or dual sensor – accurate measurement results
• Also in combination with Hydrogen
• Various monitoring possibilities
• Flexible use
• Suitable for Ex-Zone 0
• Area monitoring

Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety.

Dimensions (W x H x D)	48 x 130 x 44 mm
Weight	220 – 250 g
Ambient conditions	Temperature–20 to +50 °C (-40 to +50 °C for max. 15 minutes) Pressure-700 to 1,300 mbar Relative humidity-Ambient conditions Relative humidity 1
Protection class	IP67
Alarm	Visual-360° Audible-Multi-tone > 90 dB at 30 cm
Operating times	~ 9 h or rather ~ 10.5 h
Charging time	< 4 h)
Datalogger	cCan be read out via Infrared > 1,000 hours with 6 gases and a recording interval of 1 value per minute
Pump operation	Maximum hose length 45 m; 148 ft.
Approvals	ATEX-I M1 Ex da ia I Ma II 1G Ex da ia IIC T4/T3 Ga IECEx-IECExEx da ia I Ma Ex da ia IIC T4/T3 Ga CSA (Canada & USA)-Class I Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3 A /Ex da ia IIC T4/T3 /Ga Measurement performance certificate-EN 50104-O2,EN 45544-1, EN 45544-2-CO & H2S,EN 60079-29-1-Methane to nonane, H2 CE mark-Electromagnetic Compatibility (Directive 2014/30/EU) MED-Marine Equipment Directive (Directive 2014/90/EU EAC-PO Ex ia I Ma X 0Ex ia IIC T4/T3 Ga X

Download Brouchure Video

East Wind Safety - Draeger X-am 8000 Multi Gas Detector in UAE, Dubai and Abu Dhabi

Dräger X-am 8000 Multi Gas Detector

Clearance measurement was never this easy and convenient:
The 1 to 7 gas detector detects toxic and flammable gases as well as vapours and oxygen all at once – either in pump or diffusion mode. Innovative signalling design and handy assistant functions ensure complete safety throughout the process.

• Specially designed for use with a pump, optimised for clearance measurement
• Clearance measurement, release and documentation in no time
• Clear signalling design
• Economical Fleet Management
• Specialist for high and low hydrocarbon concentrations
• Inductive charging protects against wear and tear

Dimensions (W x H x D)	179 x 77 x 42 mm
Weight	Approx. 495 g, depending on sensor configuration, without strap, without pump Approx. 550 g, depending on sensor configuration, without strap, with pump
Housing/display	Durable two-component housing/High-contrast colour display
Operating times	> With CatEx and 3 EC sensors Typically 24 hours With IR and 3 EC sensors Typically 22 hours With 3 EC sensors Typically 120 hours With CatEx, PID and 3 EC sensors Typically 17 hours With IR, PID and 3 EC sensors Typically 16 hours With CatEx-, IR- and 3 EC sensors Typically 14 hours PID only Typically 42 hours
Start up time	Typically <60 seconds for standard sensors
Data storage	12 MB, e.g. at 10 minutes per hour of gas exposure with measuring values changing by the second on all 7 channels: approx. 210 hours
Protection class	IP67
Air pressure	700 to 1,300 mbar
Air humidity	10 to 95% relative humidity, non-condensing
Temperature	-20 °C to +50 °C
Charging time	<4 hrs
Pump operation	Max. hose length 45 m
Approvals	cCSAus, IECEx, ATEX, CE, MED

Download Brouchure Video

Dräger X-am® 2800

The X-am^® 2800 multi-gas detector measures up to four gases and is equipped with a particularly shock-resistant CatEx sensor. With the Dräger Gas Detection Connect software, it offers live data transmission and powerful fleet management. Designed for personal monitoring, the X-am^® 2800 offers the highest level of safety at a low cost of ownership.

•Dual sensors
•Powerful data analysis in the cloud
•Comfortable asset management
•Tailor-made gas monitoring
•Sensors: durable and powerful
•Focus on sustainability

Download Brochure Video
Dräger X-am® 5800 Multi-Gas detector

The X-am^® 5800 multi-gas detector measures up to six gases and is equipped with a particularly shock-resistant CatEx sensor. With the Dräger Gas Detection Connect software, it offers live data transmission and powerful asset management. Designed for personal monitoring, the X-am^® 5800 offers you the highest level of safety at a low cost of ownership.

Powerful data analysis in the cloud
•Comfortable asset management
•Tailor-made gas monitoring
•Powerful sensors
•Focus on sustainability

Download Brochure Video
Dräger X-zone® 5800 Multi Gas Detector

State-of-the-art area monitoring – the Dräger X-zone^® 5800 in combination with the Dräger X-am^® 5000, 5100 or 5600 gas detection instruments can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of zone 0 extend the range of applications in mobile gas detection technology.

Area monitor

Innovative area monitoring
•Clear warning
•Wireless fenceline
•Continuous operation for up to 120 hours
•Pump or diffusion mode – suitable for your respective application
•Other benefits
•Interfaces

applications

specifications

Download Brochure Video

Eastwind Safety is well-known in multigas monitor and portable gas detector manufacturing firms in the United Arab Emirates with advanced devices. The main mission of our group is to produce excellent gas detectors that meet high demands from most experts in respective fields while preserving safety in unsafe environments. Our product lineup includes multi gas detectors and gas monitors that detect harmful gases constantly, providing workers and facilities with real-time information for protection.
We pride ourselves in being the most trusted gas detector suppliers in UAE, specifically durable and reliable solutions for almost every industry – multigas detector for multiple-gas detection, gas detectors for specific usage, and with all these qualities designed to serve at the greatest level of performance and safety standards.
At Eastwind Safety, we believe in the supremacy of innovative safety solutions that include, but not limited to, portable gas detectors and multi gas detectors. We want to provide the most accurate and reliable form of gas monitoring technology so as to secure workers from potential threats in a safer environment using multi gas monitor. Our clients here in the UAE love us as we are the ones that can give them not only products but peace of mind.
Vision
Being one of the country’s most trusted supplier of gas detector in UAE by turning industrial safety into a different legislation through quality and innovation.
Mission
Striving to deliver healthier and safer workplace for everyone in terms of bringing advanced technologies regarding gas monitoring plus world-class care for clients
Why Choose Us?
• Great multi gas monitors and detectors.
• Efficaciously made for performance and reliability.
• Complete safety solutions through reliable UAE-based gas detector vendors.
• Prompt, efficient after-sales care and client support