Tailor-made for use under extreme conditions: The Draeger CPS 7900 provides excellent protection against a wide range of hazardous substances. It is qualified equally well for work in explosive areas and for handling cryogenic substances.
• Protection in a class of its own
• D-MEX: 5-Fold safety
• Outstanding wearing comfort
• Ready at any time
• Ready for the extraordinary
• Never again gasping for a breath
The Draeger CPS 7900 was developed to protect its wearer when handling toxic or hazardous materials and to provide much needed support for an variety of dangerous tasks.
Colors
Blue or orange
Sizes
Size S for body heights of 1.50 m to 1.65 mrnSize M for body heights of 1.60 m to 1.75 mrnSize L for body heights of 1.70 m to 1.85 mrnSize XL for body heights of 1.80 m to 2.00 mrnSize XXL for body heights of 1.95 m to 2.10 m
Zipper
Closes at top or bottom, Cover flap with hook and loop fastener or snaps
Integrated boots or socks
Safety boots in size 43 to 50 (German sizing system), Gas-tight socks in 3 sizes from 40 to 50
Gloves
Previous EN combination in size 9 to 11, New EN combination in size 10 to 11
Clear view
Anti-fog visor
External air supply
Regulation Valve PT 120 L, Air-connect
Approvals
EN 943-1:2002rnEN 943-2:2002 (ET)rnBS 8467rnEN 1073-2rnEN 14126
Increase performance by up to four hours – without the need for elaborate preparation or logistics. When work gets hot, the Dräger Comfort Vest CVP 5220 is always ready to use because it delivers the cooling action itself. This means no pre-freezing, no dipping into water, no risk due to dangerous circulating air, and no time loss.
• Automatic cooling above 82°F
• Regenerates when stored – within 4 hours at most
• Wearing comfort
• Service life of the PCM-elements: up to three years
• Easy donning thanks to hook-and-loop fasteners
• Vest can be washed after the elements have been removed
• Available in four different sizes (S/M, L/XL, XXL/XXXL, XXXXL/XXXXXL)
Increased performance by up to four hours – without the need for elaborate preparation or logistics: when work gets hot, the Dräger Comfort Vest CVP 5220 is always ready to use as it delivers the cooling action itself. This means: no pre-freezing, no dipping into water, no risk due to dangerous circulating air – and no time loss.
Skin temperature difference when using the Dräger Comfort Vest CVP 5220
5 – 7°F
Deployment time
approx. 1.5 – 4 hours
Weight complete, including cooling Elements
approx. 4.63 lb
Cooling surface
approx. 2.37 ft2
Material (vest)
Polyester
Material (cooling elements)
salt crystal mixture, packed in polyester / polyamide
Color
inside : black
Outside : blue
PCM-elements
20 pieces
Restoration time of cooling elements
at approx. 68°F : approx. 4 hours
at approx. 46°F : approx. 30 minutes
The Dräger CPS 5800 is a limited-use chemical protective suit for industrial applications and operations on board that involve a gaseous, liquid or solid hazardous substance.
• Gas-tight suit
• Comprehensive protection
• Comfortable to wear
• Large opening for donning / doffing (diagonally across the front); with no additional assistance required
• Zipper with external chain and a downward direction of fastening
• Double flap with continuous hook-and-loop fastener protects zip fastener
• Soft Dräger face cuff
• Integrated gas-tight socks with boot flaps for use with multiple boot sizes
• Fixed gloves combine butyl outer with laminate inner lining for increased protection against chemicals and punctures
• Dräger pressure relief valve for discharging air from the suit
The Dräger CPS 5800 is a limited-use chemical protective suit for industrial applications and operations on board that involve a gaseous, liquid or solid hazardous substance.
Approvals
EN 943-1:2002, EN 943-2:2002 (ET), SOLAS II-2, Reg. 19, ISO 16602:2007
Temperature
– 30 °C to + 60 °C in use
– 20 °C to +25 °C in storage
Weight
2.2 kg
Sizes
Size M for heights between 1.60 m and 1.75 m
Size L for heights between 1.70 m and 1.85 m
Size XL for heights between 1.80 m and 1.90 m
Size XXL for heights between 1.85 m and 2.00 m
The Dräger CPS 5900 is the ideal limited-use, gas-tight chemical protective suit for hazmat incidents. Where complete protection against hazardous gases, liquids and particles is of the utmost priority, this lightweight garment is the suit of choice.
• Gas-tight suit
• The right level of protection
• Offering even more comfort
• Fully encapsulating suit for maximum space protection
• Wide front entry on left side for easy donning & doffing
• Zipper fastener (bottom up)
• Double flap zipper protection
• Flexible and foldable two-layer visor offers almost natural field of vision
• Integrated gas-tight socks with boot flaps for use with multiple boot sizes
• Fixed gloves combine butyl outer with laminate inner lining for increased protection against chemicals and punctures
• Kevlar over-glove for additional cut protection
• Integrated waist belt for size adjustment
• Optional with connector for external air supply to extend decontamination phase
The Dräger CPS 5900 is the ideal limited-use, gas-tight chemical protective suit for hazmat incidents. Where complete protection against hazardous gases, liquids and particles is of the utmost priority, this lightweight garment is the suit of choice.
Approvals
NFPA 1994, EN 943-2, EN 943-1, SOLAS II-2, Reg.19, ISO 16602
Temperature
-22 ˚F to 140 ˚F (-30 °C to +60 °C) in use
-4 ˚F to 77 ˚F (-20 °C to +25 °C) in storage
Weight
Approx. 6.6 lbs. (3.0 kg)
Approx. 7.7 lbs. (3.5 kg) With Dräger Air-Connect
Sizes
S (150–165 cm / 59″ to 65″)
M (160–175 cm / 63″ to 69″)
L (170–185 cm / 67″ to 73″)
XL (180–200 cm / 71″ to 79″)
XXL (195–210 cm / 77″ to 83″)
If you are looking for protection against cryogenic hazardous substances and low concentrations of acids and alkalis then the Dräger CPS 6800 chemical protective suit is the right choice. The new and innovative suit design is more flexible and allows you to comfortably enter confined spaces.
• Outstanding protection
• Perfectly adapted to your needs
• Snug, flexible and comfortable
• Always ready for use with low service expenses
If you are looking for protection against cryogenic hazardous substances and low concentrations of acids and alkalis then the Dräger CPS 6800 chemical protective suit is the right choice. The new and innovative suit design is more flexible and allows you to comfortably enter confined spaces.
Approvals
EN 943-1:2002, EN 1073-1:1998 / EN 1073-2:2002, EN 14126:2003, EN 14593-1:2005, ISO 16602:2007, EN 14594:2005, SOLAS
Temperature
– 30 °C to + 60 °C in use
– 5 °C to +25 °C in storage
Weight
With face cuff and socks – approx. 2.9 kg without accessories
With face cuff and boots – approx. 5.4 kg without accessories
With full face mask and socks – approx. 3.5 kg with accessories
With full face mask and boots – approx. 6 kg with accessories
Sizes
Size S for heights between 1.50 m and 1.65 m
Size M for heights between 1.60 m and 1.75 m
Size L for heights between 1.70 m and 1.85 m
Size XL for heights between 1.80 m and 1.95 m
Size XXL for heights between 1.95 m and 2.05 m
Integrated boots or socks
Safety boots in sizes 43 to 50 Gas-tight socks in three sizes from 40 to 50
Gloves
Butyl gloves in sizes 9 to 11 Viton® gloves in sizes 9 to 11 Viton® / Butyl gloves in sizes 9 to 11 Foil gloves with Tricotril® overgloves in sizes 10 and 11
Face connection
Face cuff (gas-tight) Integrated full face mask
Glove accessories
Cotton gloves, Gas-tight sleeve, Cut-resistant Tricotril® or K-MEX® overgloves
Ventilation
Regulationsventil PT 120 L
Individually adjustable
Control valve PT 120 L
Wearing comfort
Carry bag, Storage and carry bag, Storage box
Customised printing
On the thigh, lower front arm or rear upper arm in various colours
If you are looking for protection against cryogenic hazardous substances and low concentrations of acids and alkalis then the Dräger CPS 6900 chemical protective suit is the right choice. The new and innovative suit design is both flexible and comfortable.
• Outstanding protection
• Perfectly adapted to your needs
• Never again gasping for a breath
• Snug, flexible and comfortable
• Always ready for use with low service expenses
If you are looking for protection against cryogenic hazardous substances and low concentrations of acids and alkalis then the Dräger CPS 6900 chemical protective suit is the right choice. The new and innovative suit design is both flexible and comfortable.
Approvals
EN 943-1:2002, EN 1073-1:1998 / EN 1073-2:2002, EN 14126:2003, EN 14593-1:2005, ISO 16602:2007, SOLAS
Temperature
– 40 °C to + 60 °C in use
– 5 °C to 25 °C in storage
Weight
Suit with securely attached boots – approx. 6.8 kg without accessories
Suit with securely attached socks – approx. 4.3 kg without accessories
Suit with securely attached boots – approx. 8.0 kg with accessories
Suit with securely attached socks – approx. 5.5 kg with accessories
Sizes
Size S for heights between 1.50 m and 1.65 m
Size M for heights between 1.60 m and 1.75 m
Size L for heights between 1.70 m and 1.85 m
Size XL for heights between 1.80 m and 2.00 m
Size XXL for heights between 1.95 m and 2.10 m
Integrated boots or socks
Safety boots in sizes 43 to 50 Gas-tight socks in three sizes from 40 to 50
Gloves
Butyl gloves in sizes 9 to 11 Viton® gloves in sizes 9 to 11 Viton® / Butyl gloves in sizes 9 to 11 Foil gloves with Tricotril® overgloves in sizes 10 and 11
Glove accessories
Cotton gloves
Gas-tight sleeve
Cut-resistant over-gloves Tricotril® or KMEX®
Clear view
Anti-fog visor
External air supply
PT 120 L control valve
Air-Connect
Attachment option
D-Connect on right and/or left hip
Easier pressure monitoring
Manometer mount
Individually adjustable
Length adjustment
Storage and transport
CPS storage and carry bag Storage box
Customised printing
On sleeve, rucksack, breast and /or thigh in different colours
The reusable gas-tight Dräger CPS 7800 provides excellent protection against gaseous, liquid, aerosol and solid hazardous substances even in explosive areas. Due to its innovative material and the new suit design it offers increased flexibility and comfort when entering confined spaces and working with cryogenic substances.
• Reliable protection
• D-mex™: 5-fold safety
• Fitted, flexible and comfortable
• Always ready
• Ready for the extraordinary
The reusable gas-tight Dräger CPS 7800 provides excellent protection against gaseous, liquid, aerosol and solid hazardous substances even in explosive areas. Due to its innovative material and the new suit design it offers increased flexibility and comfort when entering confined spaces and working with cryogenic substances.
Temperature
During use : -30 °C to +60 °C
(temperatures as low as -80 °C are possible for short-term exposure and have been tested by Dräger for the D-mex™ material (but not as part of the EC typeapproval test)
During storage : -30 °C to +60 °C
Weight
With face cuff and socks – approx. 3.5 kg without ventilation system
With face cuff and boots – approx. 5.4 kg without ventilation system
With full face mask and socks – approx. 4.3 kg without ventilation system
With full face mask and boots – approx. 6.2 kg without ventilation system
APPROVALS
EN 943-1:2002, EN 943-2:2002 (ET) , EN 1073-1/2, EN 14126, EN 14593, vfdb 08/01:2006-11, BS 8467, SOLAS
Colour
Blue or orange – Olive or beige
Sizes
Size S for body heights from 1.50 m to 1.65 m
Size M for body heights from 1.60 m to 1.75 m
Size L for body heights from 1.70 m to 1.85 m
Size XL for body heights from 1.80 m to 1.95 m
Size XXL for body heights from 1.90 m to 2.05 m
Integrated boots or socks
Safety boots in sizes 43 to 50 (German sizing system) Gas-tight socks in 3 sizes from 40 to 50 (German sizing system)
Face connection
Face cuff (gas-tight) Integrated full face mask
Gloves
Previous EN combination (FKM) in sizes 9 to 11 Previous EN combination (FKM/Butyl) in sizes 9 to 11 New EN combination (foil glove/Tricotril®) in sizes 10 to 11
Glove accessories
Cotton gloves Gas-tight arm sleeve/wristband Cut-resistant overgloves Tricotril® or K-MEX® Gigant
Ventilation
Regulating valve PT 120 L
Wearing comfort
Braces
Storage and transport
Carry bag CPS Storage and carry bag Storage box
Customer-specific printing
On thigh, lower arm front or upper arm rear in various colours
The Dräger SPC 2400 is a reusable suit, which is reliable in protecting you from liquids and dust. The suit is available in a specially robust version made of PVC or as a light, water vapour permeable version made of flexothane.
The Dräger SPC 2400 is a reusable suit, which is reliable in protecting you from liquids and dust. The suit is available in a specially robust version made of PVC or as a light, water vapour permeable version made of flexothane.
The Dräger SPC 3700 is a constant flow disposable suit. In combination with the newly designed vest CVA 0700 it offers ideal protection, comfort and flexibility. The liquid-tight protective suit (type 3) protects the wearer from contact with chemicals and allows greater movement, while the vest provides the necessary breathing and ventilation air for a pleasant cooling effect.
• Carefree breathing – even in tough environments
• Get more done with more safety
• Easy to don, easy to wear
• Quality you can see and feel
Carefree breathing – even in tough environments.
With SPC 3700, you are no longer dependent on bulky masks or heavy equipment such as an SCBA, and no longer have to experience breathing resistance.
You are provided with optimal quality air from an external air source. The special Dräger CVA (Cooling Vest Air) 0700 evenly distributes the breathing air and creates not only a cooling effect but also reduces fogging and improves vision. In addition,
Tjee noise level was optimised to less than 70 dB(A) for even more comfort.The extreme light weight of both, suit and vest, add to the overall comfort and make even long, complex or stressful jobs easier to perform and safer to complete
Input pressure (air supply)
3.0 bar to 10.0 bar
Flow rate
300 – 400 l/min (depending on the compressed air supply)
Max. hose length
1 to 100 m
Weight (depending on the suit size)
2.6 to 2.9 kg
Temperature (in operation)
+10 °C to +60 °C
Response pressure of warning whistle
2.5 bar (+/- 0.5 bar)
> 90 dBA down to 1.5 bar
Approvals
EN 14594 – Supplied by an airline breathing apparatus with constant airflow
Dräger CVA 0700
Material
Mesh fabric
Input coupling (standard)
Dräger CEJN 96 series
Input coupling (options)
Hansen, Foster, Schreader, Stäubli, Walther
Size
700 x 900 x 100 mm
Weight
1.9 kg (including the air supply manifold)
Lifetime
10 years
Approvals
EN 14594
Supplied by an airline breathing apparatus with constant airflow
Dräger SPC 3700
Material (single use)
Tychem® F (grey)
Storage time
5 years
Weight (depending on the suit size)
ca. 0.8 to 1.0 kg
Approvals
EN 14605, EN ISO 13982-1, EN 13034, EN 1073-1, EN 14126, EN 1149-1
Light and comfortable to wear: Dräger SPC 4X00 liquid-tight splash suits offer reliable protection against the finest particles and powders, many concentrated inorganic acids and alkaline solutions, and are also resistant to a wide variety of organic liquid chemicals. They are CE-certified and classified as type 3, 4, 5 and 6.
• Splash Suit
• Reliable protection, yet light and comfortable
• No matter what your job requires, these suits offer suitable protection for any application
• Dräger SPC 4400: The ideal protective suit for simple tasks
• Dräger SPC 4800: Advanced protection
• Dräger SPC 4900: Total protection for workers and their equipment
No matter what your job requires, these suits offer suitable protection for any application.
suit.Dräger SPC 4400: The ideal protective suit for simple tasks.
The one-piece overalls are available in two different materials (CPM and CLF). The ends of the hood, sleeves and legs are fitted with an elastic band and a thumb loop. The zip runs along the centre of the front and, in the version made from CPM, it is fitted with two cover panels, including adhesive strips. The CLF version is fitted with hook-and-loop fasteners instead of tape, enabling limited use. There is a cover panel in the throat area as well, for safely sealing off the suit. The overalls are designed for use with single-use dust masks, half- or full-face masks, compressed air breathing apparatuses or compressed airline devices.
Dräger SPC 4800: Advanced protection
What sets the Dräger SPC 4800 apart is its unique face cuff which is also built into the gas-tight Dräger CPS. It is soft, flexible and exceptionally easy to handle and wear. The one-piece overalls with liquid-tight bonded seams are equipped with permanently integrated gloves, socks with cuffs as well as a zip on the back. This makes it unnecessary to waste time taping up the suit. It is designed for use with full-face masks in combination with a compressed air breathing apparatus, an air purifying respirator or a compressed air hose device.
Dräger SPC 4900: Total protection for workers and their equipment
Like the SPC 4800, the SPC 4900 features permanently integrated gloves and socks, and opens in the back. Instead of the hood with face cuff, the SPC 4900 features an extra-large hood with a visor. The suit is used with a full-face mask in combination with a compressed air breathing apparatus. The compressed air breathing apparatus is worn underneath the suit, protecting all the equipment against any contamination
Material properties
CPM – coated barrier protection material
CLF – carrier fleece
Usage frequency 1 – designed for limited use 3
Storage life
SPC 4400 (CPM): 5 years
SPC 4400 (CLF): 10 years
SPC 4800 and 4900: 10 years
Suit approvals
ISO 16602, EN 14605, EN ISO 13982-1, EN 13034, EN 1073-2, EN 14126, EN 1149
Particularly resistant against alkaline solutions and acids. The chemical protection suit WorkMaster Industry provides reliable protection during tank and boiler cleaning, during maintenance and repair work in narrow spaces or refineries, during chemical transports, cleanup operations and many other dangerous types of work.
• Zipper on the reverse side
• Integrated ventilation system
• Optional knee and elbow reinforcement
• Good maneuverability
• Tool less glove exchange
• For all sizes
Particularly resistant against alkaline solutions and acids. The chemical protection suit WorkMaster Industry provides reliable protection during tank and boiler cleaning, during maintenance and repair work in narrow spaces or refineries, during chemical transports, cleanup operations and many other dangerous types of work.
Approvals
EN 943-1:2015 type 1b SOLAS, Industrial application
Temperature
-30 °C to 60 °C – in use
-5 °C to 25 °C – in storage
Weight
Approx. 6.5 kg
Size
M, L, XL or XXL
Safety boots
PVC in sizes 43 – 48 or Nitril-P in sizes 43 – 50
Necessary equipment
Integrated, built-in full face mask with P, RA or PE connection
Chemical-resistant protective gloves made of butyl, FKM or FKM / butyl, in sizes 9, 10, 11
Optional accessories
Ventilation system RV PT 120 L
K-MEX® Gigant – over glove: size 14
TRICOTRIL® – over glove: sizes 10, 11
Suit reinforcement at elbows and knees
Gastight arm cuffs
CSA hanger, in T form
Cotton gloves
Talc bag, grease pencils (2x) for closure system
Talc bag, grease pencils (2x) for closure system
Customer-specific labeling of WorkMaster Industry
