Clearance measurement was never this easy and convenient:
The 1 to 7 gas detector detects toxic and flammable gases as well as vapours and oxygen all at once – either in pump or diffusion mode. Innovative signalling design and handy assistant functions ensure complete safety throughout the process.
• Specially designed for use with a pump, optimised for clearance measurement
• Clearance measurement, release and documentation in no time
• Clear signalling design
• Economical Fleet Management
• Specialist for high and low hydrocarbon concentrations
• Inductive charging protects against wear and tear
Portable gas detectors are mobile since they are carried on or by personnel. They are used by anyone who is entering a confined space to assess the gases inside and to measure the concentration of the oxygen, or where there’s the potential for the presence of a dangerous gas or a lack of oxygen. The detector can be carried by the person so that the breathing zone is constantly monitored for safety. it can be used for area monitoring as well.
Dimensions (W x H x D)
179 x 77 x 42 mm
Weight
Approx. 495 g, depending on sensor configuration, without strap, without pump
Approx. 550 g, depending on sensor configuration, without strap, with pump
> With CatEx and 3 EC sensors Typically 24 hours
With IR and 3 EC sensors Typically 22 hours
With 3 EC sensors Typically 120 hours
With CatEx, PID and 3 EC sensors Typically 17 hours
With IR, PID and 3 EC sensors Typically 16 hours
With CatEx-, IR- and 3 EC sensors Typically 14 hours
PID only Typically 42 hours
Start up time
Typically <60 seconds for standard sensors
Data storage
12 MB, e.g. at 10 minutes per hour of gas exposure with measuring values changing by
the second on all 7 channels: approx. 210 hours
