The Dräger PointGard 2200 series is a self-contained gas detection system for the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.
• Ready to use out of the box • Fast and stable flammable gas detection • Flexible communications • Rugged and compact housing • Rugged and compact housing • Monitor remote areas up to 30meter (98ft) away
For the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices.
Dräger PointGard 2200 CAT Ex
Flammable gases in ambient air
Type
Self-contained gas monitor with alarm devices for general-purpose applications
Measuring Range
Catalytic bead (CAT Ex) sensor 0–100% LEL
LCD display
75 mm/3″ backlit graphic LC display Selectable red or green illumination, alphanumeric
Indicators
3 status LEDs (green/yellow/red)
Operation
Through three front mounted push buttons
Security
Separate passwords for maintenance and configuration menu
Signal output analog
Normal operation 4–20 mA Maintenance Constant 3.4 mA or 4 mA ±1 mA 1 Hz modulation (adjustable)
Power supply AC version
Operating voltage 100–240 VAC 50–60 Hz Nominal power 6 W Operating current (max) 0.5 A Inrush current Max. 40 A at 230 VAC 50 Hz
Power supply DC version
Operating voltage 8–30 VDC Nominal power 6 W Operating current (max) 2.5 A
Electrical certification
CE rating, IEC/EN 61010-1 Complies with UL 61010-1 Class B device, residential use compliant with ICES-3(B)/ NMB-3(B)
Relay specification
2 alarm relays and 1 fault relay SPDT contact 5 A @ 230 VAC, 5 A @ 30 VDC, resistance bound Alarm reset through front-mounted push button
Alarm devices
Variants with amber and red LED strobes activate on 2 alarm levels independently Variants with green steady light activate red strobe on 1 common alarm level. Green steady light turns off during alarm or fault condition; optional blue LED strobe 85-105 dB adjustable-volume buzzer with continuous and pulsating tone
Temperature (storage)
-20 to +65 °C/-4 to +149 °F
Temperature (operation)
-20 to +50 °C/-4 to +122 °F
Humidity
0 to 95% r. h., noncondensing
Pressure
20.7 to 38.4″ Hg/700 to 1,300 hPa
Material
Glass fiber reinforced polyester (GFRP)
Mounting
Wall mount with internal screws or optional SS mounting brackets
