The Dräger Alcotest® 6810 offers professional users precise and quick breath alcohol analysis in a user-friendly and compact form. Thanks to its wide range of possible configurations, the handheld instrument can be easily adapted to meet different international regulations and guidelines.
• “Slide’n‘click” mouthpiece
• Optimized instrument interaction
• Documentation, data logger
• Low energy consumption
• Quick and precise analysis
• Rapid ready for use
• Safe and easy to use
The Dräger Alcotest 6810 med has been adapted to determine breath alcohol concentrations especially in medical applications. It may be used, for example, to diagnose vascular injuries (about others in the urology during transurethral resections of the prostate) after previous application of an ethanol containing rinsing solution. It is also used for testing patients for previous alcohol consumption at the emergency reception area or before methadone substitution
Principle of measurement
Electrochemical Dräger Sensor in 1/4” technology; alcohol specific
Measurement range
0 to 2.5 mg/L; if measurement range limit is exceeded, a message is displayed
Sampling Standard
automatic sampling when minimum volume is reached Passive sampling without mouthpiece or manual initiation of sampling possible
Ready for use
Approx. 6 s after switching on
Display of measurement result
After approx. 3 s (at 0 mg/L); after approx. 10 s (at 0.5 mg/L, room temperature)
Operating temperature
-5 to +50 °C / 23 to 122 °F
Display
Graphic backlit LCD display; 41 mm x 24 mm / 1.6″ x 0.9″ (128 x 64 pixels)
LED
3-colour, to support display and warning messages/optical interface for printer
Audible signal
Different signal tones to support display messages and warnings
Datalogger
Storage of last 2000 tests with test numbers, date and time
Power supply
Two AA alkaline or NiMH batteries. Charge status displayed.Approx. 1,500 tests can be performed on one set of alkaline Batteries. Internal charging of NiMH batteries possible.
Calibration
Wet gas or dry gas calibration
Dimensions (H x W x D), weight
Approx. 142 mm x 75 mm x 36 mm / 5.6″ x 2.9″ x 1.4″, approx.195 g / 0.5 lbs, incl. batteries
Instrument configuration
Direct menu-guided configuration of instrument settings (PIN required) No additional PC software needed
